VIAIR DUAL PLATINUM 425C Onboard Air System

$839.95

Additional information

Weight46 lbs
Dimensions27 × 23 × 11 in
Company

-

VIAIR’s Gen. 2 Dual 425C Onboard Air System (OBA) is our fastest filling OBA, featuring our new 425C Gen.2 compressors capable of putting out 4.80 CFM at 0 PSI head pressure. The 425C is our first compressor with duty cycle of 33% at 175 PSI and 50% at 100 PSI. This pre-packaged compressed air solution includes: two Platinum or Stealth Black 425C compressors, a 2.5 gallon air tank, an inline pressure regulator, and all necessary components needed to install a working onboard air system.

The 425C features upgraded internal components that make it a true 175 PSI-rated working pressure pump, and has newly designed thicker vibration isolators that absorb vibration and sound. The modern-inspired head design highlights an eye-catching setup. This Gen. 2 Onboard Air System delivers the vital air source for numerous pneumatic applications.

 

Additional Info Download:

 

FEATURES
– 2.5 Gallon Matte Black VIAIR Air Tank (200 PSI)
– (2) 425C Platinum or Stealth Black VIAIR Compressors
– Illuminated Dash Panel Gauge Kit, Black Face 200 PSI
– Digital Tire Inflation Gun (180PSI)
– 0-220 PSI Pressure Regulator
– Sealed Pressure Switch (140 PSI on, 175 PSI off)
– 1/4” Drain Cock
– Heavy Duty 80 Amp Relay
– Mini ANL Fuse Holder with 60 Amp Fuse
– 1/4” Quick Connect Coupler (M)
– 1/4” 250 PSI Safety Valve
– (4) 1/4” NPT(M) to 1/4” Airline Straight Push to Connect Fittings
– 6-Port Billet Manifold with Mounting Bracket (1/4”)
– (2) 20ft. 1/4” Air Line Included
– 5 Pc. 1/4” NPT Plugs Kit
– Extension Braided Black Coil Hose
– Rubber Tip Blow Gun
– 3-in-1 Air Down Gauge
– Stainless Steel Air Line Cutter
SPECIFICATIONS
– 12-Volt
– Permanent Magnetic Motor
– Duty Cycle: 50% @ 100 PSI
– Duty Cycle: 33% @ 175 PSI
– Max. Working Pressure: 175 PSI
– Max. Air Tank Size: 5.0 Gallon
– Combined Max. Amp Draw: 60 Amps
– Ingress Protection Rating: IP67
– Dimensions: 9.25″L x 4.14″W x 6.59″H
– Net Weight: 11.10 lbs.

 

All Fittings are NPT rated unless otherwise noted. Wiring harness NOT included.

Please Note: Use thread sealant for proper installation. Thread tape is not recommended.
Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs.

 

PERFORMANCE DATA

PSICFMABARLPMA
04.80400136.040
104.63431.0125.045
204.42472.0118.048
304.15483.0111.053
403.93524.0100.055
503.70545.095.056
603.53556.084.057
703.35567.080.057
803.18578.072.057
902.98579.069.056
1002.835710.059.055
1102.685811.055.053
1202.555712.049.051
1302.4456
1402.2755
1502.1054
1601.9553
1701.8052
1751.7451

* Supply Voltage: 13.8 Volts

 

FILL RATES

2.5 GALLON TANKFILL RATE
0 to 175 PSI1 min. 40 sec. (± 05 sec.)
140 to 175 PSI28 sec. (± 03 sec.)
5.0 GALLON TANKFILL RATE
0 to 175 PSI3 min. 06 sec. (± 10 sec.)
140 to 175 PSI57 sec. (± 05 sec.)
37″ X 12.5″ TIRESFILL RATE
0 to 30 PSI3 min. 16 sec. (± 10 sec.)
15 to 30 PSI1 min. 52 sec. (± 05 sec.)
40″ X 15.5″ TIRESFILL RATE
0 to 30 PSI4 min. 01 sec. (± 10 sec.)
15 to 30 PSI2 min. 11 sec. (± 05 sec.)

 

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

You were not leaving your cart just like that, right?

Enter your details below to save your shopping cart for later. And, who knows, maybe we will even send you a sweet discount code :)

Pin It on Pinterest